Dual gauge idler flat photos

These photos were taken in the early 1990's in Antonito, Colorado. Some of these photos can actually be used as scale drawings. The black and white painted carpenter's square in the photos has the black and white changing on the one foot marks. On the long end of the square, the black and white stripes are both one inch wide. On the short end of the square, the inside white stripe is 1/2" and the outside black strip is one inch.

The photos on this web site may be used by anyone for non-commercial use. If you would like to reproduce them in a non-commercial use (i.e. non-profit news letter), please give me credit for the photos and let me know you are using them. If you have a commercial use, please contact me first.

This shot shows the two couplers on the end of the car, one in the center for standard gauge and one offset for narrow gauge. The "ladders" in the corner of the car are visible.

Return to Narrow gauge detail photo home page.

I may be contacted at douglasvanveelen@spring.com